eco3spa Starter Kit

Are you ready to revolutionise your hot tub experience? Say goodbye to chlorine and bromine and hello to eco3spa—a game-changer in water care! 

Our Starter Kit will keep your hot tub clean and sanitised for one month. It is just the beginning of your journey to healthier, softer skin and crystal-clear water.

It’s got everything you need:

Step 1 will thoroughly clean and flush out biofilm and chlorine or bromine residue, preparing your hot tub for a month of eco-friendly bliss. No more biofilm build-up with the ever increasing chemical use  — just fresh, inviting water.

After you've used Step 1 just add the Step 2 Water Conditioner and a couple of Step 3 Sanitising Tablets, jump in and relax.

No more testing and water balancing, no more skin irritation and no more chemical smells.

And after a month of using eco3spa you’ll love the difference: your skin will be soft and hydrated and your water will be free of that harsh chlorine smell. You’ll be more relaxed because you won't have been faffing around testing and balancing your water and you'll wonder why you didn’t switch sooner!

Once you fall in love with the eco3spa experience, you can keep the goodness going by purchasing individual products or upgrading to our 3-month Watercare Kits for extra savings, or your can save even more and opt for a subscription. With a subscription, you'll never run out of water care essentials—they’ll be delivered straight to your door just when you need them. How’s that for convenience?

And the best part? eco3spa isn’t just good for you—it’s good for the planet. It’s biodegradable and environmentally friendly, so you can enjoy your hot tub guilt-free. Make the switch today and transform your soak into a sustainable luxury!

eco3spa: Hot Tub Care Made Simple!

Step 1 - Clean:

Add the eco3spa Hot Tub Cleaner during every 3-month water change. This step removes biofilm, body fats, and any chemical residues.  This is important even in brand-new or empty tubs.

1. Fill your hot tub to 50mm above all jets and air vents and heat the water to at least 30 degC, or use your existing water, it doesn't matter if it has chlorine or bromine in it.
2. Fully open all jets centralise any diverter valves and remove filters and headrests.
3. Add the cleaner to the water (save a bit for wiping surfaces later).
4. Run jets for 60 minutes, then let the water stand for 30 minutes before running again for 30 minutes. Foaming and dark particulates are normal.
5. Drain the tub, clean surfaces with the reserved cleaner, and rinse thoroughly before refilling with fresh water.

Step 2 - Condition:

Add the eco3spa Water Conditioner immediately after cleaning and refilling with fresh water. The conditioner in the starter kit will be active in your water for one month.

Step 3 - Sanitise:

Add Water Sanitiser Tablets before each use.  There are 16 tablets in the starter kit.

• Start with two tablets added directly to the filter compartment with pumps running when your tub is first filled, or use a fully open floating dispenser. The tablets should dissolve quickly and if they don't you need to move them into flowing water.
• Add one tablet before every soak. For inactive tubs, add at least two tablets weekly.
• If water becomes dull or foamy, add an extra tablet daily until it clears.

eco3spa offers effortless water care that's safe for your skin and the environment. Follow these steps for a clean, safe and luxurious hot tub experience every time!